By default, nothing is loaded into this slot, and any preamplification you employ is as clean and transparent as UA can make it (which is to say that it is very clean and transparent indeed). The noise has never been worse than the target model.”įrom the user's point of view, Unison manifests itself as a new plug-in slot at the top of each Console mic input channel, beneath the existing preamp controls. It does reduce range some, but allows us to drive emulations into saturation without converter clipping.

Dave Berners explained: 'In order to be able to drive the hardware preamp model into virtual saturation, part of the physical A-D headroom must be preserved above the saturation point of the model. In theory, of course, this leaves the upper end of the A-D converter's dynamic range unused and hence reduces the dynamic range and signal-to-noise ratio of the inputs, but as long as enough is left to capture the dynamic range of the original preamp being modelled, this is not a problem in practice. It turns out that whereas the Apollo preamps are capable of exerting up to 65dB gain prior to A-D conversion, UA's modelled plug-ins also apply gain in the digital domain, and thus present a correspondingly lower gain range in the analogue domain. However, if you have an audio interface, you can use a digital audio workstation software as a mixer instead.I asked UA what they meant by saying that the plug-ins change the 'gain staging response” of the hardware. Several mixer models also let you control your audio through equalizers, filtering, panning, and more. On the other hand, a mixer's primary purpose is to combine audio signals. Q: What's the Difference Between an Audio Interface and a Mixer?Īudio interfaces primarily convert signals from digital to analog and vice versa.

It's also crucial for converting the analog output of different instruments to digital signals, so your computer can understand and record it. Q: Do Audio Interfaces Improve Sound Quality?Īs most microphones only produce low voltage levels, the built-in preamps in an audio interface are required so that its output becomes usable for recording.

Most interfaces also have outputs, so you can listen to your creation, whether via a recording or in real-time. This function allows you to record and process audio on your computer. An audio interface is a device that converts your mic's or instrument's analog signals into digital signals and vice versa.

Best audio interface for mac catalina